Additional Information

Additional Information
  • Home

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
  • Call us on 212-268-0409
  • My Account
  • Gift Certificates

Juki MF - 7523 3 Needle 4 Thread Top Bottom CoverHem Stitch Machine & Stand with servo motor


Juki MF - 7523 3 Needle 4 Thread Top Bottom CoverHem Stitch Machine & Stand with servo motor

Juki MF-7523 - 3
175.00 LBS
Calculated at checkout

Product Description


  • Seams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce high-grade well-tensed seams for outer wear.

  • The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread.

  • A differential-feed adjustment mechanism with a micro-adjustment mechanism to provide a constant differential-feed ratio. The differential-feed amount can be easily adjusted to the best suited value for the material to be used.

  • A feed dog inclination adjustment mechanism to work effectively at securing the material being sewn in place with increased reliability and thereby preventing uneven material feed and puckering.

  • A micro-lifter to keep the presser foot in a slightly raised position during sewing to prevent slippage and deformation.


      for more info click below:




  • A needle bar stroke conversion mechanism
  • Looper thread twining prevention mechanism
  • Stitch type 3-needle top and bottom coverstitch 
  • Max. sewing speed: 6.500rpm 
  • Stitch length: 1.23.6mm (stitch length can be adjusted to 4.4mm) 
  • Differential-feed ratio: 1:0.71:2 
  • Needle gauge: 4.0mm 4.8, 5.6, 6.4mm 
  • Needle: UY128GAS #9S#14S (standard#10S) 
  • Lift of the presser foot: 5mm (with top and bottom coverstitch),
  • 8mm(with bottom coverstitch) 
  • Stitch pitch adjustment: By dial 
  • Differential feed adjustment: By micro-adjustment mechanism 
  • Lubrication: Automatic



Find Similar Products by Category